Removing The Unit - Sony MEX-BT5000 Operating Instructions Manual

E:\Working\2693038211\269303821MEXBT5000U\01US02CD-U.fm
01US+00COV-U.book Page 22 Thursday, April 27, 2006 11:03 PM
Fuse replacement
When replacing the fuse, be
sure to use one matching the
amperage rating stated on the
original fuse. If the fuse blows,
check the power connection and
replace the fuse. If the fuse
blows again after replacement,
there may be an internal
malfunction. In such a case,
consult your nearest Sony
dealer.
Cleaning the connectors
The unit may not function properly if the connectors
between the unit and the front panel are not clean. In
order to prevent this, detach the front panel (page 5)
and clean the connectors with a cotton swab dipped
in alcohol. Do not apply too much force. Otherwise,
the connectors may be damaged.
Main unit
Notes
• For safety, turn off the ignition before cleaning the
connectors, and remove the key from the ignition
switch.
• Never touch the connectors directly with your fingers
or with any metal device.
22

Removing the unit

1
Remove the protection collar.
1 Detach the front panel (page 5).
2 Pinch both edges of the protection collar,
Fuse (10A)
2
Remove the unit.
Back of the front
1 Insert both release keys simultaneously
panel
2 Pull the release keys to unseat the unit.
3 Slide the unit out of the mounting.
then pull it out.
x
until they click.
MEX-BT5000
2-693-038-21 (1)
masterpage:Left
Hook facing
inwards.