Buick Cascada2018 Owner's Manual page 25

Table of Contents

Advertisement

24
Keys, Doors, and Windows
The turn signal indicators may flash
to indicate unlocking. See Vehicle
Personalization 0 114.
Pressing
will disarm the alarm
system. See Vehicle Alarm System
0 31.
: Press to lock both doors, the
trunk, and the fuel door. Press and
hold
to close all windows.
The turn signal indicators may flash
and/or the horn may sound to
indicate locking.
If the driver door is open when
pressed, all doors lock and the
driver door will immediately unlock,
if enabled through vehicle
personalization. See Vehicle
Personalization 0 114.
If the passenger door is open when
is pressed, all doors lock.
may also arm the alarm
Pressing
system. See Vehicle Alarm System
0 31.
: Press and hold to release the
trunk.
: Press and release one time to
initiate vehicle locator. The exterior
lamps flash and the horn chirps
three times.
Press and hold
three seconds to sound the panic
alarm. The horn sounds and the
turn signals flash for 30 seconds,
or until
is pressed again or the
vehicle is started.
: Press to operate the remote
start feature. See Remote Vehicle
Start 0 26.
is
The buttons on the transmitter are
disabled when there is a key in the
ignition.
Programming Keys to the
Vehicle
Only keys programmed to the
vehicle will work. If a key is lost or
stolen, a replacement can be
purchased and programmed through
your dealer. The vehicle can be
reprogrammed so that lost or stolen
keys no longer work. Any remaining
keys will need to be reprogrammed.
Each vehicle can have up to eight
keys matched to it.
Programming with
Recognized Keys
for at least
To program a new key:
1. Insert the original, already
2. Turn the ignition off and
3. Quickly, within five seconds,
4. Insert the new key to be
5. Repeat Steps 1 5 if additional
If a key is lost or damaged, see your
dealer to have a new key made.
programmed key in the ignition
and turn the ignition on.
remove the key.
insert the second original
already programmed key in the
ignition and turn the ignition on.
programmed and turn the
ignition on within five seconds.
The security light will turn off
once the key has been
programmed.
keys are to be programmed.

Advertisement

Table of Contents
loading

Table of Contents