Hitachi 53SBX59B Operating Manual page 31

USING THE REMOTE TO
CONTROL CABLE/SATELLITE BOX FUNCTIONS
Operating the precoded function for your cable/satellite box.
This remote is designed to operate different types of cable boxes and satellite systems. You must first program the remote to match the
remote system of your cable/satellite box. (Refer to page 33.)
1. Set the MULTI-PAGE select switch to TV/CABLE/SAT.
2. Turn ON your cable/satellite box.
3. Press the CABLE button on the remote to switch to CABLE mode, or the SAT button to switch to SAT mode.
4. Aim the remote control at the front of your cable/satellite box.
5. Hold down the CABLE/SAT button on the remote, enter the two digit preset code that matches your cable/satellite box as shown
on page 33. The remote will turn off your cable/satellite box when the correct two digit preset code is entered. When this occurs,
the remote control is programmed for your cable/satellite box. If the cable/satellite box does not turn off after five seconds, try
another two digit preset code.
6. The remote will now control your cable/satellite box.
NOTES:
1. If your cable/satellite box cannot be operated after
performing the above procedures, your cable/satellite box
code has not been precoded into the remote.
2. In the unlikely event that your cable/satellite box cannot
be operated after performing the above procedures,
please consult your cable/satellite box operating guide.
3. The remote control will remember the codes you have
programmed until the batteries are removed from the
remote control. After replacing the batteries repeat the
entire programming procedure as stated above.
4. If your cable/satellite box does not have a power function,
the remote will issue the CHANNEL UP function.
5. The LST-CH button will act as the cable box ENTER
button if required.
6. The SLEEP button will act as your cable box 100 button
if required.
7. The INPUT button will act as the TV/SAT button when in
SAT mode.
PRECODED CABLE BOX buttons
These buttons transmit the chosen precoded cable codes.
PRECODED SATELLITE BOX buttons
These buttons transmit the chosen precoded satellite codes.
EXCLUSIVE TV buttons
These buttons are for operating the TV.
,
POWER
TV
PIP
PIP CH
VOL
INFO
RECALL
FAV
CH
REC
1
4
7
INPUT
31
SAT
CABLE
SWAP MOVIE
HELP FRZ
TV/CABLE/SAT
VCR
AUDIO
LST-CH
MUTE
CH
EXIT
GUIDE
L
I
G
H
T
C.S.
MENU FAV
CH
SVCS SCHED
SELECT
2 3
5 6
8 9
SLEEP
0
CLU-615MP
,
,