Table of Contents
Advertisement
Troubleshooting
Symptom
No Power
Message not
transmitted
Hearing other
noises or
conversation on
a channel
Poor audio
quality
Limited talk
range
Try This:
Recharge or replace Li-Ion battery.
Make sure Push to Talk is completely pressed while
transmitting.
Recharge, replace, and/or reposition batteries.
Verify the transmit light is illuminated while speaking.
Verify Channel, Frequency, and Code settings are correct.
Frequency may be in use. Change on all radios if possible (see
page 31 and 32).
Bandwidth does not match. For optimal audio quality when
communicating with VLR150 radios, the bandwidth of other
radios should be set to 12.5 kHz, if possible.
Steel and/or concrete structures, heavy foliage, buildings, or
vehicles decrease range (see page 26). Check for clear line of
sight to improve range.
Wearing radio close to body such as in a pocket or on a belt
decreases range. Change location of radio.
49
Hide quick links:
Advertisement
Table of Contents
