Changing The Channel Display Settings - Pioneer Elite PRO-950HD Operating Instructions Manual

TV Guide On Screen™ System Operation
2
Press ENTER to display the current settings and the
options to change them.
3
Select one of the options, then follow the on-screen
instructions.
• Yes, everything is correct: displays a helpful information
screen. Press ENTER to quit the TV Guide On Screen™.
• Yes, but my channel lineup is incorrect: displays a screen
from which you may choose the correct channel lineup.
Press ENTER to display the Channel Editor screen.
• No, repeat setup process: displays Screen 1 shown on
page 33.

Changing the channel display settings

From the channel display settings you can set/change:
• the display setting to always display (On), never display (Off), or
display only when channel information is available (Auto Hide).
• the tuned channel number.
• the channel position in the channel listing.
1
Highlight the "Change channel display" item.
2
Press ENTER to display the channel editor.
3
Press / to highlight a channel then press ENTER to go
to the Grid Options menu.
From the Grid Options menu you can set:
• channel – On (display in channel list), Off (don't display)
or Auto Hide (hide when no program information is
available)
• tune channel – the channel number that the channel
listing is tuned to
• position – place that the channel appears in the channel
list
• Re-sort numerically to change the channel order in the
Listings service (and Channel Editor) to numeric
• Undo all changes to reset all the Channel Editor options
(and Listings display) to their original (factory) settings
4
When you've made all the settings you want for the
channel, highlight "done" then press ENTER.
• To cancel without saving any of the changes you made,
select "cancel".
10
51
En