Advertisement
ADAS-500 Data Collection Module
System Installation
If your computer meets the minimum system requirements listed in the previous section, you are ready to install the software.
The installation utility on the distribution setup diskette must be used to install the software.
Installation
Close all applications you have running in Windows. Place the distribution cd in drive d: (cd drive) and the setup utility
should run automatically. If it does not run, from the Start menu select Run... Enter d:\Setup.exe (or drive letter of the cd
drive) in the edit box and click OK.
When the installation utility appears, click Next to continue through the installation. The utility will step you through the
process of installation.
When the installation is complete, it will have created the folder below if the default settings were used
C:\Program Files\ATCO\ADAS-500 Data Collection
There should be a menu option under the Start menu:
Start | Programs | ADAS-500 Data Collection
Removing or Uninstalling the Software
To remove the ADAS-500 Data Collection Module from a computer, you should not delete the folders and files manually.
Remove it by selecting Start | Settings | Control Panel.
From the control panel, double click the Add / Remove Programs icon. From the list of applications in the window, select
ADAS-500 Data Collection Module and click the Add/Remove button.
Copyright © 2005-2009 ATCO. All Rights Reserved.
Page 2
User's Manual
Section 2 System Installation
Revision 1.9
Advertisement
