D-Link DGS-1210-10 Manual page 92

4 Web-based Switch Configuration
Version of the SSL protocol which listed below:
Version
SSL v2.0
SSL v3.0
TLS v1.0
SSL (Secure Sockets Layer) is the secure communications protocol of choice for a large part of the Internet
community. There are many applications of SSL in existence, since it is capable of securing any
transmission over TCP.
Transport Layer Security (TLS), is the successor to SSL and provides much the same functionality. It
ensures privacy between communicating applications and their users on the Internet. When a server and
client communicate, TLS ensures that no third party may eavesdrop or tamper with any message.
Hyper Test Transfer Protocol Secure (HTTPS) is the secure version of HTTP which is often used to protect
highly confidential information, enhance encryption and authentication, and running on top of SSL/TLS.
HTTPS is used to secure web browsing service between a browser and a web server.
To browse the web via HTTPS with highly encryption and authentication, select Enabled and click Apply
button to enable SSL state and the HTTP will be disabled.
SSL Ciphersuite Settings:
RSA-NULL-MD5: Specifies RSA key exchange with NULL encryption and MD5 hash is enabled or disabled.
RSA-NULL-SHA1: Specifies RSA key exchange with NULL encryption and SHA hash is enabled or disabled.
RSA-DES-SHA1: Specifies RSA key exchange with DES encryption and SHA hash is enabled or disabled.
RSA-3DES-SHA1: Specifies RSA key exchange with 3DES encryption and SHA hash.
DH-RSA-DES-SHA1: Specifies DH key exchange with DES encryption and SHA hash is enabled or disabled.
DH-RSA-3DES-SHA1: Specifies DH key exchange with 3DES encryption and SHA hash is enabled or
disabled.
Description
First SSL protocol for which implementations exist.
Revisions to prevent specific security attack, add non-RSA ciphers and
support for certificate chains.
Revision of SSL 3.0 to update the MAC layer to HMAC, add block
padding for block ciphers, message order standardization and more alert
messages.
NOTE: The DGS-1210 series support TLS v1.0
and do not support SSL v3.0.
Figure 4.107 – Security > SSL Settings - Enable
D-Link Smart Managed Switch User Manual
8 5
8 5