D-Link DGS-1210-10 Manual page 110

4 Web-based Switch Configuration
Source Port: Specifies the source port.
Source Port Mask: Defines the range of source IP addresses, relevant to the ACL rules. For example, to set
0 – 15, set mask of FFF0.
Destination Port: Specifies the destination port.
Destination Port Mask: Defines the range of destination IP addresses, relevant to the ACL rules. For
example, to set 0 – 15, set mask of FFF0.
Click Next button then the ACL profile is added.
•
To define the IPv6 ACL UDP profile: Select IPv6 ACL with UDP of Protocol Type and click Next
button. The updates to show the follows:
Figure 4.130 - Add Access Rule – IPv6 TCP
1 0 3
1 0 3
D-Link Smart Managed Switch User Manual