Power Supplies; Systems Management - Lenovo ThinkServer TS150 Product Manual

GPU adapters
The TS150 server supports the GPU adapter options that are listed in the following table.
Note: A GPU adapter must be configured for server models that use processors without integrated graphics;
a GPU adapter is optional for server models that use processors with integrated graphics.
Table 13. GPU adapter options
Description
ThinkServer 1GB NVS 315 PCIe x16 Graphic Adapter by NVIDIA
ThinkServer 2GB Quadro K620 Graphic Adapter by NVIDIA

Power supplies

The TS150 server supports one 250 W AC (100-240 V) fixed power supply (80 PLUS Bronze) or one 400 W
AC (100-240 V) fixed power supply (80 PLUS Platinum). A country-specific power cord is included with the
server (except EMEA models; EMEA models do not ship with a power cord).
Important: To ensure that the correct power supply is chosen, it is highly recommended to validate system
configuration for specific power requirements by using the latest version of the ThinkServer Power Planner,
which is available at this website:
http://support.lenovo.com/us/en/downloads/ds101155

Systems management

The ThinkServer TS150 models with Intel Xeon E3-1200 v5 processors support Intel Active Management
Technology (AMT) which provides out-of-band, hardware-based advanced system control, monitoring,
alerting, and remote presence functions. The TS150 models with Intel Core i3, Pentium, or Celeron
processors support Intel Standard Manageability (ISM), which is a subset of the AMT features.
Both AMT and ISM offer the following features:
Out-of-band management
System health and status monitoring
System event log and alerting
Hardware inventory
Boot device selection
Remote power control
Serial over LAN
IDE/USB Redirect for mounting remote media
In addition, AMT supports KVM (keyboard, video, mouse) redirection (KVM redirection requires an Intel Xeon
E3-1200 v5 processor with integrated graphics).
Important: Health monitoring, event log, alerts, hardware inventory, boot device selection, and remote
power control features are accessible out-of-band with a web browser. Serial over LAN, IDE/USB Redirect,
and KVM redirection features require third-party tools that are not supplied or supported by Lenovo.
Both AMT and ISM operate independently of the server and remain operational even if the server is powered
off. Out-of-band management is performed through the Ethernet port 0, which is a shared port for data and
management.
AMT and ISM support the following management protocols:
DASH 1.1
WS-MAN
SNMP Platform Event Traps (PET)
Lenovo ThinkServer TS150 (Intel Xeon E3-1200 v5, Core i3, Pentium/Celeron G Series Processors)
Part number Maximum
supported
4X60G88210 1
4X60G88211 1
15