Philips DVP3050V/55 Service Manual page 24

Main 7/8 Schematic Diagram < VCR Section >
CAUTION !
F
For continued protection against fire hazard,
replace only with the same type fuse.
A V
ATTENTION : Pour une protection continue les risqes
d'Incele n'utiliser que des fusible de même type.
Risk of fire-replace fuse as marked.
"This symbol means fast operating fuse."
"Ce symbole reprèsente un fusible à fusion rapide."
CAUTION !
Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.
If Main Fuse (F1001) is blown , check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.
NOTE:
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.
1-13-14
Voltage indications for PLAY, REC and DVD modes
on the Schematic Diagrams are as shown below:
PLAY mode
1 2 3
5.0
~ REC mode
5.0 (2.5)
DVD mode
< >
0
The same voltage for
Indicates that the voltage
PLAY, REC & DVD modes. is not consistent here.
" " = SMD
H982BSCM7