Table of Contents
Advertisement
30
Static IP
Select Static IP to begin configuration of the Static IP connection.
Internet Connection Type
Enter the account name provided by your ISP.
Account Name
Enter the domain name provided by your ISP.
Domain Name
Specify the Maximum Transmit Unit size. It is recommended you accept the default setting of
MTU
Auto. Otherwise, packets will be fragmented downstream if the MTU is set too high or too low,
which impacts network performance. In extreme cases, an MTU setting that is too low can
prevent the ECB350 from establishing some connections.
Assign an IP address Manually.
IP Address
Specify an IP address's subnet mask.
IP Subnet Mask
Specify the gateway of your network.
Gateway IP Address
Specify the primary DNS server's IP address.
Primary DNS
Specify the second DNS server's IP address.
Secondary DNS
Check to Enable to recognize pings on the ECB350 WAN interface or Disable to block pings on
Discard Ping on WAN
the ECB350 WAN interface. Note: Pinging IP addresses is a common method used by hackers to
test whether the IP address is valid. Blocking pings provides some extra security from hackers.
Click Accept to confirm the changes or Cancel to cancel and return previous settings.
Accept / Cancel
Note: Clicking Accept does not apply the changes. To apply them, use Status > Save/Load (see section 4.1).
Advertisement
Table of Contents
