Switching Audio Channels; Switching Camera Angles - Pioneer DVR-745H-S Operating Instructions Manual

06 Playback

Switching audio channels

DVD (VR) DVD-RAM HDD
WMA/MP3
Taiwan and Philippines model:
1
For HDD and VR mode content that has
both a main and a SAP (Secondary Audio
Program) audio channel, you can switch
between main (L), SAP (R), or both (L+R).
Other:
1
For HDD and VR mode content recorded
with bilingual audio, you can switch between
left (L) channel, right (R) channel, or both
2
(L+R).
When playing Video CDs and audio CDs you
can switch between stereo, just the left
channel or just the right channel.
Some Super VCDs have two soundtracks.
With these discs you can switch between the
two soundtracks as well as individual
channels in each.
AUDIO
• Press repeatedly to display/
switch the audio channel.
The audio channel(s) currently playing are
indicated on-screen.
HDD DVD (VR) DVD-RAM
Taiwan and Philippines model:
L+R – Both channels (default)
L – Left/main channel only
R – Right/SAP channel only
Other:
L+R – Both channels (default)
L – Left channel only
R – Right channel only
Note
1 Only when HDD Recording Format is set to Video Mode Off (HDD Recording Format on page 113).
2 When playing a Dual Mono recording/Bilingual Recording on a VR mode disc, if you are listening to the Dolby
Digital soundtrack via the digital output, you cannot switch the audio channel. Set Dolby Digital Out to Dolby
62
Digital PCM (see Dolby Digital Out on page 109) or listen via the analog outputs if you need to switch the
audio channel.
En
CD Video CD Super VCD
2
Video CD WMA/MP3
CD
Stereo – Stereo (default)
1/L – Left channel only
2/R – Right channel only
Super VCD
1 Stereo – Soundtrack 1 / Stereo
(default)
1 L – Soundtrack 1 / Left channel
1 R – Soundtrack 1 / Right channel
2 Stereo – Soundtrack 2 / Stereo
2 L – Soundtrack 2 / Left channel
2 R – Soundtrack 2 / Right channel

Switching camera angles

DVD-Video
Some DVD-Video discs feature scenes shot
from two or more angles—check the disc
box for details: it should be marked with a
icon if it contains multi-angle scenes.
When a multi-angle scene is playing, the
same icon appears on screen to let you know
that other angles are available (this can be
switched off if you prefer—see Angle
Indicator on page 114).
ANGLE
• Switch the camera angle.
• The angle number is displayed on-
screen.
• If the disc was paused, playback starts
again with the new angle.