Eco Solution; Energy Saving Mode; Eco Sensor - Samsung QM49H User Manual

Eco Solution

MENU m → System → Eco Solution → ENTER E
Eco Solution

Energy Saving Mode

Eco Sensor

Screen Lamp Schedule
No Signal Power Off
Auto Power Off Off (Recommended)
– The displayed image may differ depending on the model.
Off
On
Off
15 minutes
Energy Saving Mode
Reduce the power consumption by adjusting the screen brightness.
• Off / Low / Medium / High
Eco Sensor
To enhance your power savings, the picture settings will automatically adapt to the light in the room.
Eco Sensor
Automatically optimises signage screen brightness in response to the room lighting.
• Off / On
― Adjusting the
Backlight setting under
― If the screen contrast is not sufficient, set the
energy standards.
Minimum Backlight
Set the minimum brightness for the signage screen. This function only works if its value is lower than the value set
in the Picture menu's Backlight setting.
― If
Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the
surrounding light intensity.
Picture while Eco Sensor is on will disable the Off.
Eco Sensor to Off. If the Eco Sensor is Off, it may not comply with
108