Standby Control; Network Standby; Power Button - Samsung QM49H User Manual

Power Control
Auto Power On
PC module power
Max. Power Saving

Standby Control

Network Standby

Power Button

Power on only
– The displayed image may differ depending on the model.
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
Off
•
On
•
On
― If
Off
― If
•
Network Standby
This feature keeps the network power on when the product turns off.
•
Power Button
The power button can be set to either turn on the power or turn on/off the power.
•
•
Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to
the display.
The message No Signal will appear if no source device is connected.
Off
The message No Signal will appear if no input signals are detected.
No Signal is displayed although a source device is connected, check the cable connection.
No Signal Message is set to Off, the
If this is the case, set No Signal Message
On
Power-saving mode will activate if no input signals are detected.
Off / On
Power on only: Set the power button to turn on the power.
Power on and off: Set the power button to turn on/off the power.
No Signal message does not appear.
to On.
107