Table of Contents
Advertisement
FH-C612NM
3.3.10 H/W Monitor
In this section, it allows you to monitor the status of the hardware on your system, includ-
ing the parameters of the CPU temperature, motherboard temperature, CPU fan speed,
chassis fan speed, and the critical voltage.
Fan Control
If [Auto] is selected, the fan speed will controlled by BMC.
If [Manual] is selected, configure the items below.
CPU1_FAN1
This allows you to set the CPU1 fan1's speed. The default value is [Smart Fan].
CPU2_FAN1
This allows you to set the CPU2 fan1's speed. The default value is [Smart Fan].
FRNT_FAN 1
This allows you to set the front fan 1's speed. The default value is [Smart Fan].
FRNT_FAN 2
This allows you to set the front fan 2's speed. The default value is [Smart Fan].
FRNT_FAN 3
This allows you to set the front fan 3's speed. The default value is [Smart Fan].
55
Advertisement
Table of Contents
