Pioneer DVR-510H Operating Instructions Manual page 75

Editing
Note
• You cannot insert chapter markers during Auto Start
Recording.
• If you pause a recording in VR mode, the recorder
automatically starts a new chapter when you restart
the recording.
• When recording in Video mode, the recorder
automatically puts chapter markers in at regular
intervals. It is not possible to add extra chapter
markers manually after recording (see also Auto
Chapter (Video) on page 97).
• When recording in VR mode, the recorder
automatically puts chapter markers in when the
audio format changes.
• The Play List and Original content on a disc can each
contain up to 999 chapters.
Note
• Similar chapter editing commands are available for
HDD content from the HDD to DVD copy screen. See
also Copying from HDD to DVD* on page 58.
Lock / Unlock
VR mode Video mode HDD
You can lock a title so that it can't be edited or erased
accidently. If you do need to edit it, you can always unlock
it later.
Important
• You can't undo any edits made before changing the
lock status. You also can't undo a lock/unlock
command using the Undo option from the Disc
Navigator menu.
1 Select 'Lock' from the Disc Navigator menu
options.
2 Use the (cursor buttons) to select the
title you want to lock (or unlock), then press ENTER.
Disc Navigator
Original
DVD
1
11/15Wed 12:30PM 2ch LP
Lock
4
Erase All
Undo
2 3
DVD Remain
0h37m(FINE)
1/1
An unlocked title will become locked; a locked title will be
unlocked. Locked titles are shown in the Disc Navigator
with a padlock icon.
• If you're editing from the HDD, remember that the
title you're looking for may be in a different group
from the one displayed.
3 Press RETURN to go back to the Disc Navigator
menu options, or select another title to lock/unlock.
Erase All
VR mode Video mode HDD
This erases all unlocked titles from the disc (see also Lock
/ Unlock on page 75).
1 Select 'Erase All' from the Disc Navigator menu
options.
2 Select 'Yes' to confirm, or 'No' to cancel, then
press ENTER.
Disc Navigator
Original
DVD
1
Lock
4
Erase All
Erase all titles?
Undo
Undo
VR mode Video mode
If you make a mistake while editing, you can generally
undo it. There are three levels of undo (in other words,
you can undo the last three edits you made).
• Select 'Undo' from the Disc Navigator menu
options.
• You can't undo anything after ejecting the disc from
the recorder or switching the recorder into standby.
• You can't undo the following operations: initializing,
recording or finalizing a disc, locking and unlocking
titles.
• You can still undo edits after exiting the Disc
Navigator screen.
2 3
DVD Remain
0h37m(FINE)
1/1
Yes No
08
75
En