Pioneer DVR-510H Operating Instructions Manual page 29

Getting started
Playing CDs and WMA/MP3 discs
The table below shows the basic playback controls for
audio CDs, and WMA/MP3 files.
Press to start playback.
PLAY
Press to stop playback.
STOP
Pauses playback, or restarts playback
PAUSE
when paused.
CD and MP3 only: Press to start scanning.
REV SCAN FWD SCAN
Press again to increase the scanning
speed. (There are two scan speeds; the
current scan speed is shown on-screen.)
Press to skip to previous/next track (or
PREV NEXT
folder for WMA/MP3 disc).
During playback, enter a track number
then press ENTER to skip directly to that
track.
CLEAR
Note
• If you want to play a DTS audio CD, make sure the
recorder is connected to a DTS-compatible amplifier
with a digital connection. Noise will be output
through the analog outputs. Also make sure that
STEREO is selected using the AUDIO button (see
Changing audio channels on page 27).
• Scanning doesn't work with WMA tracks.
Playing Video CDs
The table below shows the basic playback controls for
Video CDs.
Some discs feature Playback Control (PBC for short)
menus. These discs show PBC in the display when you
load them and display a menu on-screen from where you
can select what to watch.
Press to start playback.
PLAY
If RESUME is displayed on-screen, play-
back starts from the place last stopped.
Press to stop playback.
STOP
You can resume playback from the same
point by pressing
again to cancel the resume function.)
Pauses playback, or restarts playback
PAUSE
when paused.
Press to start scanning. Press repeatedly
REV SCAN FWD SCAN
to increase the scanning speed. (There are
two scan speeds; the current scan speed
is shown on-screen.)
Press to skip to previous/next track. (When
PREV NEXT
a PBC menu is displayed, press to display
the previous/next page.)
During playback, enter a track number
then press ENTER to skip directly to that
track.
While a PBC menu screen is displayed,
CLEAR
use to select numbered menu items.
Each press skips forward 30 seconds. Use
CM SKIP
to a maximum of 4 mins. Note that this
function doesn't work when playing in
PBC mode.
During playback, press to start slow-
STEP/SLOW
motion playback. Press repeatedly to
change the playback speed.
While paused, press to advance a single
frame (forward direction only).
Press to display the disc menu of a Video
RETURN
CD playing in PBC mode.
Note
• When playing in PBC mode, some playback features,
such as search, repeat and program play are not
available. You can play a PBC Video CD in non-PBC
mode by pressing
PLAY.
PLAY. (Press STOP
to start playback instead of
04
29
En