Connecting A Usb Device - Pioneer DVR-450H-S Operating Instructions Manual

Connections
02

Connecting a USB device

(DVR-650H-S/DVR-550H-S only)
Using the USB ports on the front of the
recorder you can connect USB devices such
as digital cameras, printers, keyboards and
PCs. Please also see the instructions that
came with the device you want to connect
before using.
USB
PictBridge-compatible
Printer
PC
Important
• Some USB devices may not work with
this recorder.
• When connecting a PC to this unit, make
sure the power is turned off on both the
PC and this unit when you connect them
via USB.
• We recommend connecting USB
devices when this recorder is switched
off (in standby).
JPEG file storage devices
• Digital still camera
• Memory card reader (any type of
memory card)
• USB memory
The Mass Storage Class (MSC) device
should be FAT-compatible. Note that if the
device is partitioned, this recorder may not
recognize it.
The Picture Transfer Protocol (PTP) can be
used to transfer up to maximum 4000 files.
24
En
DVR-650H-S/DVR-550H-S
HDD/DVD OPEN/CLOSE
DivX COPY HDMI
STANDBY/ON DV IN USB INPUT 2 S-VIDEO
ONE TOUCH
STOP REC
COPY
INPUT
CH REC MODE
SELECT
USB USB
(Type B) (Type A)
USB
Digital Camera
Keyboard
WMA/MP3 file storage devices
• Memory card reader (any type of
memory card)
• USB memory
• PC (Use Connect PC function)
The Mass Storage Class (MSC) device
should be FAT-compatible. Note that if the
device is partitioned, this recorder may not
recognize it.
Note that although multi-slot card readers
VIDEO L(MONO) R AUDIO REC
can be used, the recorder will only recognize
the first card inserted. To read another card,
remove all the cards and insert the card to be
read again.
Using a USB hub
• Use a hub compatible with USB 1.1 and/
or 2.0.
• Use an independently powered hub (bus
powered hubs may not work reliably).
• In the event of unreliable operation with
the hub, we recommend plugging the
device directly into the recorder's USB
port.
• Operation may become unreliable if too
many devices are connected to the hub.
In this case, try unplugging some
devices.
• If the power delivered through a hub is
insufficient for the devices connected,
communication can become unreliable.
In this case, disconnect one or more
devices then perform a USB restart. (See
Restart USB Device on page 116.)
Using a USB printer
• Use a PictBridge-compatible printer.
Using a USB keyboard
• Do not use a PS/2 keyboard connected
using a PS/2-USB adapter.