Toyota SD Service Manual page 3

Notice on the Service Manual
1. This Service Manual for the RS2000 sewing machines is written to assist users in properly diagnosing and
correcting problems with the machine.Please read through this Service Manual carefully and utilize it
as a reliable guide for daily service activities.
2. This Manual is composed of the following sections.
1. Specification
2. Troubleshooting
3. Adjustment of respective parts
4. Removal and reassembling of main components
When referring to this Service Manual for repair or others, start to read the "Troubleshooting" for
correct diagnosis and then proceed to the "Adjustment of respective sections" or "Removal and
reassembling of main components".
Important safety instruction
Following describes the safety instructions to prevent possible risks, damages or losses resulting
from improper handling in the repair, inspection or operation of the RS2000.Please read these
instructions carefully and observe them faithfully.
Meaning of warning symbols (
Mortal or serious injury could result from improper handling.
Physical injury or material loss could result from improper handling.
Precautions during inspection:
1. Make sure to turn the power supply off before starting the repair work.
There is risk of electric shock.
2. After removing parts for repair, or others, make sure to secure the electrical safety for the handling of
the sewing machine in accordance with local laws and regulations concerning electrical operations.
There is risk of electric shock.
1. When leaving from the sewing machine, turn off the power supply switch or disconnect the power cable
plug from the power outlet.
There is risk of injury.
1. When replacing parts, use only the genuine parts supplied by us in order to assure the performance
of the sewing machine.
Introduction
and
1
):