Removing The Keypad Switch Pc Board - Motorola ROKR E2 Service Manual

Level 1 and 2 Service Manual

Removing the Keypad Switch PC Board

6809497A99-O
1. Remove the SD card, battery cover, battery, SIM, stylus, rear housing, side
bands, transceiver PC board, and switch lock as described in the procedures.
2. Use the metal tweezers to release the keypad switch PC board latch on each
side of the main transceiver PC board (see Figure 19).
Figure 19. Removing the Keypad Switch PC Board Latch
3. Turn the keypad switch PC board over to reveal the PC board connector.
4. Use the disassembly tool to unseat the PC board flex connector.
Figure 20. Removing the Keypad Switch PC Board Connector
March 27, 2006
Latch
Metal Tweezer
Flex connector
Disassembly
Disassembly tool
051995o
051994o
37