Setup Navigator - Pioneer DVR-231-S Operating Instructions Manual

08 The Initial Setup menu
• Select 'OSD Language' then use the
buttons to select a language option.
OSD Language
OSD Language
Display
• Default setting: On
Basic
Basic
Disc
Video
Audio
Recording
Playback
You can have the recorder show or hide on-screen
operation displays (for Play, Stop, etc.), and choose
whether to switch the front panel display on or off when
the recorder is in standby.
Display
OSD Screen
Front Panel
Remote Control
• Default setting: Recorder1
You only need to set this if you are using more than one
Pioneer DVD recorder in the same room.
Basic
Basic
Disc
Video
Audio
Recording
Playback
So that each remote control operates only its own
recorder, make this setting different for each recorder
and remote in the room.
48
En
English
Clock OSD Screen
Tuner Front Panel
OSD Language
Display
Remote Control

Setup Navigator

On
On
Clock
Tuner
OSD Language
Display
Remote Control
Setup Navigator
There are three different recorder IDs. When set to
Recorder2 or Recorder3, the remote control mode is
shown in the front panel display.
Remote Control
Remote Control Recorder1
After selecting a new recorder ID, you have to confirm the
change by selecting Yes or No (use the
then pressing ENTER.
Remote Control
Remote Control Recorder2
After changing this setting, the remote
control mode must be changed.
OK to Continue ?
Note that as soon as you change the recorder ID, the
remote becomes inoperative until you change the remote
to the same ID.
To set the remote, press and hold RETURN and a number
button (1, 2 or 3) for five seconds.
Setup Navigator
• Default setting: n/a
Basic
Basic Clock
Disc Tuner
Video OSD Language
Audio Display
Recording Remote Control
Playback Setup Navigator
The Setup Navigator appears automatically when you
switch on the recorder for the first time (or after resetting
the recorder). It is also available from the Initial Settings
menu should you need it at any other time.
See also Switching on and setting up on page 20.
buttons),
Yes No
OSD Language
Tuner
Clock