Pioneer DVR-231-S Operating Instructions Manual page 47

The Initial Setup menu
Note
• If you want to cancel before tuning has finished,
press ENTER.
• You can manually tune and skip blank channels
using the Manual CH Setting, below.
Manual CH Setup
• Default setting: n/a
Tuner
Auto CH Setup Channel
Manual CH Setup Skip
Guide CH Setup AFT
From the manual channel setup screen you can
manually fine tune channels and set channels to skip.
The skip function lets you skip channels where there is no
station so that as you change channels using the
CHANNEL +/– buttons or the number buttons, you only
change to channels that have a station.
1 Select 'Manual CH Setup' to display the manual
channel setup screen.
Manual CH Setup
Auto CH Setup Channel
Manual CH Setup Skip
Guide CH Setup AFT
• Use the buttons to change the guide channel
for setting.
• If you want to skip the displayed channel (because
there is no station assigned to that channel), change
the Skip setting to On.
• If you want to manually tune the displayed channel,
change the AFT (Auto Fine Tuning) setting to Off,
then move down to Level to manually tune to a
station.
Manual CH Setup
Auto CH Setup Channel
Manual CH Setup Skip
Guide CH Setup AFT
Level
2 To return to the Initial Setup menu, press ENTER.
Guide CH Setup
• Default setting: n/a
Guide channels are used by the VCR Plus+ system so
that the channel number specified in the VCR Plus+
programming numbers can be guaranteed to
correspond to the correct station.
1
2
necessary.
Look in your TV guide to see which channel numbers
should be assigned to which guide channels.
002 • Use the
Off
On
• Use the
• Use the PREV / NEXT button to display the previous/
3
RETURN.
OSD Language
• Default setting: English
002
Off
Off
+32
This sets the language of the on-screen menus and
displays.
Select 'Guide CH Setup', then 'Guide CH'.
Tuner
Auto CH Setup Guide - CH
Manual CH Setup
Guide CH Setup
Assign channel numbers to the guide channels as
Guide CH Setup
Auto CH Setup Guide - CH
Manual CH Setup 1 0 0 6
Guide CH Setup 2 - - - -
3 - - - -
4 - - - -
5 - - - -
buttons to change the guide channel
for setting.
buttons to change the channel
number.
next 10 guide channels.
To return to the previous screen, press ENTER or
Basic
Basic Clock
Disc Tuner
Video OSD Language
Audio Display
Recording Remote Control
Playback Setup Navigator
1/20
6 - - - -
7 - - - -
8 - - - -
9 - - - -
10 - - - -
08
47
En