Omron CS1G/H-CPUxx-EV1 Programming Manual page 249

Manipulating Files
CX-Programmer
1,2,3...
Programming Console
Item 1 Item 2
0: Send 0: PLC to Memory Card Select OBJ, CIO, HR, WR,
1: Memory Card to PLC Select OBJ, CIO, HR, WR,
1: Verify
HMC-AP001 Memory Card Adapter
Memory Card
Use the following procedure for file memory operations.
1. Double-click the Memory Card icon in the Project Window with the CPU
Unit online. The Memory Card Window will be displayed.
2. To transfer from the CPU Unit to file memory, select the program area, I/O
memory area, or parameter area in the project work space, select Transfer
from the File Memory, and then select transfer to the Memory Card or to
EM file memory.
or To transfer from file memory to the CPU Unit, select file in file memory
and then drag it to the program area, I/O memory area, or parameter area
in the project work space and drop it.
Note Use project transfer operations to create and read symbol table files (SYM-
BOLS.SYM) and comment files (COMMENTS.CMT) on the CX-Programmer.
FUN
The following operations can be performed.
Item 3
AR, DM, EM, or STD.
AR, DM, EM, or STD.
Select OBJ, CIO, HR, WR,
AR, DM, EM, or STD.
Computer's PC Card
slot
000000 CT00
CLR
0: Transfer
CONT
SHIFT
1: Verify
#
0: Initialize
↓
1: Delete
Item 4
Set transfer start and
end addresses.
Set transfer start and
end addresses.
Set comparison start and
end addresses.
Section 5-2
Item 5
Media type, file name
Media type, file name
Media type, file name
213