Motorola CP150 Basic Service Manual page 26

2-14
Motorola Part
No.
AAPMKN4003 Radio-to-Radio Cloning Cable
RLN4008 Radio Interface Box
5886564Z01 RF Adaptor
0180305K08 Shop Battery Eliminator
HSN9412 Wall-Mounted Power Supply
3080369B71 or Computer Interface Cable
3080369B72
6686533Z01 Knob Remover/Chassis Opener
HKN9216 IBM Computer Interface Cable
8180384N65 Housing Eliminator
Motorola Part
No.
RSX4043A TORX screwdriver
6680387A70 T6 TORX bit
R1453A Digital readout solder station
RLN4062A Hot air workstation, 120 V
0180386A78 Illuminated magnifying glass with
lens attachment
0180302E51 Master lens system
0180386A82 Anti-static grounding kit
6684253C72 Straight prober
6680384A98 Brush
1010041A86 Solder (RMA type), 63/67,
0.5mm diameter, 1 lb. spool
0180303E45 SMD tool kit (included with
R1319A)
Table 2-2 Service Aids (Continued)
Description
Table 2-3 Recommended Service Tools
Description
Test Equipment, Service Aids, and Service Tools
Application
Allows a radio to be duplicated from a master radio by
transferring programmed data from the master radio to
the other.
Enables communications between the radio and the
computer's serial communications adapter.
Adapts radio's antenna port to BNC cabling of test
equipment.
Interconnects radio to power supply.
Used to supply power to the RIB (120 VAC).
Use B72 for the IBM PC AT or newer (9-pin serial
port). Use B71 for older models (25-pin serial port).
Connects the computer's serial communications
adapter to the RIB (PLN4008).
Used to remove the front cover assembly.
Connection from computer to RIB.
Allows testing of the radio outside of the housing.
Application
Tighten and remove chassis screws
Removable TORX screwdriver bit
Digitally controlled soldering iron
Tool for hot air soldering/desoldering of surface
mounted integrated circuits
Illumination and magnification of components
Used during all radio assembly and disassembly pro-
cedures