Bosch PSB 1080 LI-2 Original Instructions Manual page 28

OBJ_BUCH-2178-002.book Page 28 Wednesday, March 19, 2014 2:25 PM
28 | English
Henk Becker
Executive Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
17.02.2014
Noise/Vibration Information
The measured values of the machine are listed in the table on page
202–203.
Noise and vibrational values (vector sum of three directions) determined ac-
cording to EN 60745.
The vibration level given in this information sheet has been measured in ac-
cordance with a standardised test given in EN 60745 and may be used to
compare one tool with another. It may be used for a preliminary assessment
of exposure.
The declared vibration emission level represents the main applications of the
tool. However if the tool is used for different applications, with different ac-
cessories or insertion tools or is poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into ac-
count the times when the tool is switched off or when it is running but not ac-
tually doing the job. This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator from the effects
of vibration such as: maintain the tool and the accessories, keep the hands
warm, organisation of work patterns.
2 609 007 735 | (19.3.14)
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Bosch Power Tools