Pioneer DV-59AVi Operating Instructions Manual page 78

08 Initial Settings menu
When set to Fix, the level of each of the 5.1
channel analog outputs is fixed. Choose Vari-
able if you want to adjust the relative levels to
balance the surround sound better for your
listening room.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
You can set the individual channel levels
between –6dB and +6dB in 0.5 dB incre-
ments using the test tone output as a guide to
set the correct levels. Adjust the levels until
the output level from all channels sounds the
same from your usual listening position. Note
that Audio Output Mode (page 75) must be
set to 5.1 Channel in order to use the test
tone.
Automatic: Select Auto to start the test tone
output. No sound will be heard from the
subwoofer.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
As the test tone plays through each speaker in
turn, it is highlighted on-screen. Use the
Joystick (up/down) to adjust the channel
output level of the current speaker. Move the
cursor left to exit the test tone sequence, or
ENTER to save the settings and exit the
channel level setting screen.
78
En
Auto
L 0.0dB
0.0dB
C
0.0dB
R
0.0dB
RS
LS 0.0dB
0.0dB
SW
Auto
L 0.0dB
0.0dB
C
0.0dB
R
0.0dB
RS
LS 0.0dB
0.0dB
SW
Manual: Use the Joystick to move the cursor
up/down to select a speaker.
Initial Settings
Auto
Digital Audio Out
Video Output
0.0dB
L
Language
0.0dB
C
0.0dB
R
Display
RS 0.0dB
Options
LS 0.0dB
Speakers
0.0dB
SW
i.LINK Setup
Move the cursor right (or press ENTER) then
use the Joystick (up/down) to set the channel
output level.
Initial Settings
Auto
Digital Audio Out
Video Output
0.0dB
L
Language 0.0dB
C
0.0dB
R
Display
RS 0.0dB
Options
0.0dB
LS
Speakers
0.0dB
SW
i.LINK Setup
To turn the test tone on/off for an individual
speaker, move the cursor right. The test tone
continues playing even when you select a
different speaker.
Initial Settings
Auto
Digital Audio Out
Video Output
L 0.0dB
Language
C 0.0dB
0.0dB
Display R
0.0dB
RS
Options
0.0dB
LS
Speakers
SW 0.0dB
i.LINK Setup
To save the settings and exit, press ENTER
with the channel level field highlighted (as
shown above).
• The subwoofer output will sound quite low
compared to the other speakers.