Connecting Using The Component Video; Output; Connecting Using The D1/D2 Video - Pioneer DV-59AVi Operating Instructions Manual

02 Connecting up
Connecting using the component
video output
You can use the component video output
instead of the standard video out jack to
connect this player to your TV (or other equip-
ment).
• Use a component video cable (not
supplied) to connect the COMPONENT
VIDEO OUT jacks to a component video
input on your TV, monitor or AV receiver.
TV
AUDIO AUDIO
OUT OUT
DIGITAL AUDIO
(2ch) (5.1ch)
FRONT SURROUND
L
L CENTER
R SUB
R
WOOFER
S400
HDMI OUT
(AUDIO)

Connecting using the D1/D2 video

output

DV-S969AVi (except Australian model) only
If your TV is equipped with a D-type video
input, you can use a D video cord to connect
this player to your TV.
TV
AUDIO AUDIO
OUT OUT DIGITAL AUDIO
(2ch) (5.1ch)
OUT
FRONT SURROUND
L
L COAXIAL
CENTER
R SUB
R
WOOFER OPTICAL
S400
HDMI OUT
(AUDIO)
DV-S969AVi
18
En
COMPONENT
VIDEO IN
OUT
COAXIAL
OPTICAL
1 2
1 2 Y
IN OUT
VIDEO S-VIDEO
CONTROL COMPONENT VIDEO OUT
OUT OUT
D1 VIDEO
INPUT
1 2
1 2 Y P
IN OUT B
VIDEO S-VIDEO
CONTROL COMPONENT VIDEO OUT
OUT OUT
• Only NTSC video is output when set to
progressive scan.
• This player is compatible with D1, D2, D3
and D4 inputs. However, when connected
to a D1 connector, only interlace video is
output.
• If you connect one or both of the S-video
jacks and the D video connector, and one
of the connected components is not S1/
S2 compatible, the automatic aspect ratio
switching will not work with any of the
connected components.
P P
B R
P
R
D1/D2
VIDEO OUT