Speaker Installation - Pioneer DV-563A Operating Instructions Manual

Initial Settings menu
• Some DVD-Audio discs don't allow down-
mixing of audio. These discs always
output multi-channel audio regardless of
the setting made here.

Speaker Installation

• Set in Setup Navigator (default: L/R: Large
| C: Large | LS/RS: Large| SW: On )
You only need to make this setting if you
connected this player to your amplifier using
the 5.1 channel analog outputs.
This setting does not affect digital audio
output.
Initial Settings
Digital Audio Out Audio Output Mode
Video Output Speaker Installation
Language Speaker Distance
Display Channel Level
Options
Speakers
Use the Speaker Installation screen to tell the
player what kinds of speakers you have
connected.
1 Use the (cursor up/down)
buttons to select a speaker
• The L and R, and RS and LS speakers are
paired; you can't set them differently.
Initial Settings
Digital Audio Out
Video Output
L Large
Language
C Large
R Large
Display
RS Large
Options
LS Large
Speakers
SW On
2 Press (cursor right) to modify the
selected speaker.
3 Use the (cursor up/down)
buttons to change the current setting.
4
speaker list if you want to modify another
2 Channel
speaker, or press ENTER to exit the
Speaker Installation screen.
Fix
• You can see the effect of your changes in
the room graphic on the right of the
screen.
• Except for the subwoofer, you can set
speaker size to Large or Small. If the main
speaker cone in the speaker is 12cm or
more, set to Large, otherwise set to Small
(or Off if you don't have that speaker).
• If you set the front L and R speakers to
Small, the center and surround speakers
are automatically set to Small and the
subwoofer to On.
• The subwoofer can only be set to On or
Off.
Press (cursor left) to go back to the
• For LPCM DVD-Audio only, if the C, LS, or
RS speakers is set to Off, the audio is
automatically downmixed to stereo.
09
67
En