Digital Audio Out Settings - Pioneer DV-410V-K Operating Instructions Manual

Digital Audio Out settings

08
Setting
HDMI Out
(DV-410V only)
Digital Out
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out
36
En
Option
LPCM (2CH)
Auto
Off
On
Off
Dolby Digital
Dolby Digital > PCM
DTS
DTS > PCM
(for DV-410V)
Off (for DV-310)
96kHz > 48kHz
96kHz
MPEG
MPEG > PCM
What it means
Set if your monitor or device only accepts stereo
input. On this setting multichannel audio is
downmixed to 2 channels for stereo linear PCM
output.
Dolby Digital, DTS and MPEG sources are
processed according to how they were encoded,
and linear PCM sources are heard as is.
No digital audio output. Choose this option when
you want to change the Digital Audio Out
settings.
Digital audio is output from the digital outputs.
No digital audio output.
Dolby Digital encoded digital audio is output when
playing a Dolby Digital DVD disc.
Dolby Digital audio is converted to PCM audio
before being output.
DTS encoded digital audio is output when playing a
DTS disc. (Noise will be output if your amplifier/
receiver is not compatible with DTS audio.)
No digital audio is output when playing a DTS
disc.DTS audio is converted to PCM audio before
being output.
No digital audio is output when playing a DTS disc.
96 kHz digital audio is converted to 48 kHz for
digital output.
96 kHz digital audio is output as is at 96 kHz.
MPEG encoded digital audio is output as is.
MPEG encoded digital audio is converted to PCM
audio for digital output.