Connecting To An Av Receiver - Pioneer DV-251 Operating Instructions Manual

Connecting Up
Connecting to an AV
receiver
To enjoy multichannel surround sound you
need to connect this player to an AV receiver
using a digital output. There are both coaxial
and optical digital jacks; use whichever is
convenient.
In addition to a digital connection, we
recommend also connecting using the
stereo analog connection.
You'll probably also want to connect a video
output to your AV receiver. You can use any
of the video outputs available on this player
(the illustration shows a standard (compos-
ite) connection).
1 Connect one of DIGITAL OUT jacks on
this player to a digital input on your AV
receiver.
AV receiver
DIGITAL AUDIO OUT
Y P
B
COAXIAL
P
R
OPTICAL
COMPONENT VIDEO OUT
S
VIDEO OUT
This enables you to listen to multichannel
surround sound.
For an optical connection, use an optical
DIGITAL IN
OPTICAL
DIGITAL IN
COAXIAL
AUDIO OUT
L
R
cable (not supplied) to connect the OPTICAL
DIGITAL OUT jack to an optical input on your
AV receiver.
For a coaxial connection, use a coaxial cable
(similar to the supplied video cable) to
connect the COAXIAL DIGITAL OUT jack to a
coaxial input on your AV receiver.
2 Connect the analog AUDIO OUT L/R
and VIDEO OUTPUT jacks on this player
to a set of analog audio and video inputs
on your AV receiver.
AV receiver
DIGITAL AUDIO OUT
Y P
B
COAXIAL
P
R
OPTICAL
COMPONENT VIDEO OUT
S
VIDEO OUT
The diagram shows standard video connec-
tions, but you can alternatively use the S-
Video or component video connections if
they're available.
3 Connect the AV receiver's video
output to a video input on your TV.
• You usually have to connect the same
kind of video cable between your DVD
player and AV receiver, and between
your AV receiver and TV.
AUDIO/
VIDEO INPUT
AUDIO OUT
L
R
02
15
En