Table of Contents
Advertisement
The system registers control input when you aren't operating the controls, or the controls
don't seem to operate correctly.
• If you use excessive force to operate the Circle Pad, or you use the Circle Pad continuously for a long period of time, in very rare
cases the Circle Pad may start registering incorrect input and need to be calibrated. Use the calibration procedure in System
Settings/Other Settings to recalibrate the Circle Pad (page 36).
NOTE: You can also go directly to the Circle Pad calibration screen by using the following procedure. First turn the power off.
Then press the Power Button while holding down the
moments.
The Touch Screen doesn't seem to operate or respond correctly to stylus input.
• The Touch Screen may need to be re-calibrated. Use the calibration procedure in System Settings/Other Settings to recalibrate the
Touch Screen (page 36).
NOTE: You can also go directly to the Touch Screen calibration procedure by using the following procedure. First turn the
power off. Then press the Power Button while holding down the
appear after a few moments.
• If you have attached a screen protector (sold separately) incorrectly to the Touch Screen, try removing it and using the Touch
Screen again. If it operates correctly, either try reattaching the screen protector, carefully following the instructions included with
it, or avoid using one.
48
,
Misaligned
Air bubbles or dirt underneath
, and
. The calibration screen will appear after a few
While holding,
press:
,
, and
. The calibration screen will
While holding,
press:
Hide quick links:
Advertisement
Table of Contents
