Display; Tv Aspect; Display Mode; Audio - JVC HR-XV45SEF Service Manual

Dvd player & video cassette recorder
Hide thumbs Also See for HR-XV45SEF:
Table of Contents

Advertisement

DISPLAY

DISPLAY

TV Aspect

Display Mode

Progressive Scan
TV Output Select
DVD
TV Aspect
4:3 : Select when a standard 4:3 TV is connected.
16:9 : Select when a 16:9 wide TV is connected.
DVD
Display Mode
Display Mode setting works only when the TV Aspect
mode is set to "4:3".
LetterBox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Panscan: Automatically displays the wide picture on the
entire screen and cuts off the portions that do not fit.
16 : 9
Widescreen
Off
RGB
Move
Select

AUDIO

Each DVD disc has a variety of audio output options.
Set this unit AUDIO options according to the type of
audio system you use.
AUDIO
Dolby Digital
DTS
MPEG
Sample Freq.
DRC

Vocal

Dolby Digital / DTS / MPEG

Bitstream: Select "Bitstream" if you connect the
DVD Player's DIGITAL OUT jack to an amplifier or
other equipment with a Dolby Digital, DTS or
MPEG decoder.
PCM (for Dolby Digital / MPEG): Select when
connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be
automatically downmixed to two-channel PCM
audio.
Off (for DTS): If you select "Off", the DTS signal is
not output through the DIGITAL OUT jack.

Sample Freq. (Frequency)

If your receiver or amplifier is NOT capable of han-
dling 96 kHz signals, select 48 kHz. When this choice
is made, this unit automatically converts any 96 kHz
signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
this unit passes each type of signal through without
any further processing.
Check the documentation for your amplifier to verify
its capabilities.

Dynamic Range Control (DRC)

With the DVD format, you can hear a program's
soundtrack in the most accurate and realistic presen-
tation possible, thanks to digital audio technology.
However, you may wish to compress the dynamic
range of the audio output (the difference between the
loudest sounds and the quietest ones). This allows
you to listen to a movie at a lower volume without
losing clarity of sound. Set DRC to On for this effect.
Vocal
DVD
Set to On only when a multi-channel karaoke DVD is
playing. The karaoke channels on the disc mix into
normal stereo sound.
Bitstream
Bitstream
PCM
48KHz
On
On
Move
Select
DVD
DivX
DVD
DVD
DivX
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hr-xv45sekHr-xv45serHr-xv45seyHr-xv45sezHr-xv45seu

Table of Contents