JVC HR-XV45SEF Service Manual page 30

4.4.5.2 Grease Applications
(1) Grease Application Method
Apply grease by using a cloth swab or brush. Care must be
exercised so that excess quantity should not be used. If the
excessive quantity is applied, wipe it with the gauze soaked
in alcohol (Isopropyl Alcohol).
(1) Inner Side Surface and Top
Surface of Loading Path
(2) Stable Adhesion Part of Base
P2, P3
(3) Arm Pinch Shaft
2
1
Chassis (TOP)
Gear Part
Cam Part
(PL-433.Yellow)
Gear Part
Cam Part Side Application
(PL-433.Yellow)
(KG-684G.Green)
Gear Sector
Boss Part Side Wall
(PL-433.Yellow)
Gear Part Side Application
(PL-433.Yellow)
Base Loading
Chassis (L)
1-30 (No.YD070)
(4) Gear Wheel Shaft
(5) Reel S. T. Shaft
(1) (2) (3) (4): KG-684G
(Green)
(5): PL-433 (Yellow)
4
3
5
Gear Cam
Gear Drive
Inner Surface of
Guide Rail
(KG-684G.Green)
Chassis (R)
(2) Regular Grease Application
Apply grease to the designated application position every
500 hour.
NOTE: POSITION OF GREASE APPLICATION
(1) Inner Side Surface and Top
Surface of Loading Path
(2) Stable Adhesion Part of Base
P2, P3 Coil
(3) Gear Cam Shaft
(4) Gear Drive Shaft
(5) Clutch Shaft Groove
3
4
6
5
Chassis (Bottom)
Cam Part
(KG-684G , GREEN)
Gear Rack F/L
Lever, Brake Driving Cam Part
Lever F/R Driving Part
Side Wall Guide Part
Plate Slider
(6) Guide Part on the Plate Slider
Side Wall (Left)
(7) Guide Part on the Plate Slider
Side Wall (Right)
(1) (2) (3) (4) (5) (6) (7): KG-
684G (Green)
2
1
7
Cam Part
(KG-684G , GREEN)
Lever Tension Driving Cam Part
Gear Sector Driving Part
Side Wall Guide Part
Lever, Spring Driving Part