In-Call Screen Layout And Operations - Kyocera C6743 User Manual

●
Place the phone face down on a level surface.
Reject an Incoming Call
■
When a call arrives, slide
 The ringtone or vibration will stop and the call will be sent directly to voicemail.
Reject a Call and Send a Text Message
You can reject an incoming call and automatically send a text message to the caller.
■
When a call arrives, slide
 The ringtone or vibration will stop and the message will be delivered to the caller.

In-Call Screen Layout and Operations

While you're on a call, you will see a number of onscreen options.
In-Call Screen Layout
■
Tap options to activate them during a call.
●
Hold : Tap to hold the current call.
●
End call : End the current call.
●
Add call : Tap to initiate a conference call.
●
Mute : Mute the microphone during an active call. Tap again to unmute the microphone.
Note: If Mute is activated, the speaker mode is deactivated.
● Speaker: Route the phone's audio through the speaker (On) or through the earpiece (Off).
Warning: Because of higher volume levels, do not place the phone near your ear during speakerphone
use.
● Bluetooth: Route the phone's audio through a connected Bluetooth headset (On) or through
the speaker (Off).

When the call is routed to a Bluetooth headset, the current call area shows the Bluetooth call
icon ( ).
●
Merge: Join two currently active calls (conference).
Phone App
to the left to reject it.
to the left to ignore the call and send a message to the caller.
47