Led Indicator; Accessory Connector - Motorola CP185 Series User Manual

1. Channel Selector Knob
Used to select channels in normal radio operation mode.
2. On/Off and Volume Knob
Turn the ON/OFF/Volume Control knob clockwise to turn
the radio ON.
Turn the ON/OFF/Volume Control knob
counterclockwise to turn the radio OFF.
Turn this knob clockwise to increase the volume.
Turn this knob counterclockwise to decrease the volume

3. LED Indicator

Indicates radio transmit, receive, scan and monitor status.
Refer to "LED Colors" on page 3 for more information.
4. Speaker
You will hear received messages through the speaker.
5. Microphone
Speak into the microphone when sending messages.
6. Liquid Crystal Display (LCD)
An 8 character single line display with up to 9 radio status
icons. Refer to "LCD Display and Icons" on page 4 for
more details.
2
English
7. Push-to-Talk (PTT) Button
Press and speak to microphone to send message.
Release and listen to receive messages.
Note: If a channel is programmed with the Busy Channel
Lockout feature, you can only transmit on that
channel if it is free.
8. Side Programmable Buttons
Refer to "Programmable Buttons" on page 5 for more
.
details.

9. Accessory Connector

2.5 mm audio in and 3.5 mm audio out port are used to
connect compatible accessories to the radio.
10. Programming Port
2.5 mm audio in (lower port) used by dealer to program the
radio.
11. Front Left/Right Buttons
Used to navigate menu, sub-menu or parameter selections
in front panel programming mode.
12. Front Programmable Buttons
Refer to "Programmable Buttons" on page 5 for more
details
.
English