Cisco Ip Phone 8800 Series Administration Guide For Cisco Unified Communications Manager - Cisco 8811 Administration Manual

Field Name Field Type
or Choices
Default Line Filter List of
comma-separated
phone device names
Lowest Alerting Line Disabled
State Priority
Enabled
One Column Display Disabled
for KEM
Enabled
Energy Efficient Disabled
Ethernet (EEE): PC
Enabled
Port
Energy Efficient Disabled
Ethernet (EEE): SW
Enabled
Port
Default Description and Usage Guidelines
Indicates the list of phones that are in the default filter.
When the default line filter is configured, users see a filter
named Daily schedule in Call notifications in the
Settings > Preferences menu of the phone. This daily schedule
filter is in addition to the preset All Calls filter.
If the default line filter is not configured, the phone checks all
provisioned lines. If configured, the phone checks the lines set
on Cisco Unified Communications Manager if the user selects
Default filter as the active filter, or if there are no custom
filters.
Custom line filters enable you to filter on high-priority lines
to reduce alert activity. You can set the alerting call notification
priority on a subset of lines covered by an alert filter. The
custom filter generates either traditional pop-up alerts or
actionable alerts for incoming calls on the selected lines. For
each filter, only the covered subset of lines will generate an
alert. This feature provides a way for users with multiple lines
to reduce alert activity by filtering and displaying alerts only
from high-priority lines. The end users can configure this
themselves. Alternatively, you can program the default line
filter and push the filter down to the phone.
Disabled Specifies the alert state when using shared lines.
Disabled Controls the display on the Key Expansion Module.
Disabled Controls EEE on the PC port.
Disabled Controls EEE on the switch port.

Cisco IP Phone 8800 Series Administration Guide for Cisco Unified Communications Manager

Phone Feature Configuration
• Disabled—When there is an incoming call alerting on
the shared line, the LED/Line state icon reflects the
alerting state instead of Remote-In-Use.
• Enabled—When there is an incoming call alerting on the
shared line, the user sees the Remote-In-Use icon.
• Disabled—The expansion module uses two-column
mode.
• Enabled—The expansion module uses one-column mode.
151