Cradlepoint AER1650 Quick Start Manual page 4

LEDS
The Cradlepoint AER1600/AER1650 must be powered using an approved 12V
POWER
DC power source.
Green = Powered ON.
•
No Light = Not receiving power. Check the power switch and the power source
•
connection.
Flashing Amber = Attention. Open the administration pages (see page 7) and
•
check the router status.
Indicates information about a data source connected to the Ether-
ETHERNET WAN
net WAN port.
Blue = Connected to an active Ethernet WAN interface.
•
Indicates information about a VPN data source.
VPN
Green = Active VPN tunnel.
•
WiFi BROADCAST (only on AER1600)
broadcast for both the 2.4 GHz and 5 GHz bands.
(green) = 2.4 GHz WiFi is on and operating normally.
2.4GHz
•
(blue) = 5 GHz WiFi is on and operating normally.
5GHz
•
These two LEDs indicate activity on the WiFi
cradlepoint.com
4