Operation Mode/Ip Settings - EnGenius EAP900H User Manual

Operation Mode
The EAP900H supports three operating modes:
Access Point, WDS AP and WDS Bridge.
Device Settines
Device Name: Enter a name for the device. The name you
type appears in SNMP management. This name is not the
SSID and is not broadcast to other devices.
Country/Region: Select a Country/Region to conform to
local regulations.
Operation Mode: Use the radio button to select an
operating mode.
Accept / Cancel: Click Accept to confirm the changes or
Cancel to cancel and return previous settings.
IP Settings
This page allows you to modify the device's IP settings.
IP Network Setting: Select whether the device IP address
will use the static IP address specified in the IP Address field
or be obtained automatically when the device connects to
a DHCP server.
IP Address: The IP Address of this device.
IP Subnet Mask: The IP Subnet Mask of this device.
Default Gateway: The Default Gateway of this device.
Leave it blank if you are unsure of this setting.
Primary / Secondary DNS: The primary / secondary DNS
address for this device.
Accept / Cancel: Click Accept to confirm the changes or
Cancel to cancel and return previous settings.
30