Table of Contents
Advertisement
Removing and installing the CPU
The mainboard supports Intel
MHz to 3.06 GHz or Intel
GHz and future generations of Celeron CPUs.
Caution! Always observe the ESD precautions when installing or
removing a system component. Refer to the "Installation
precautions" on page 33.
Removing the CPU
Follow these steps to remove a CPU:
1
Remove the system cover. See page 35 for more detailed
instructions.
2
Remove the air baffle by lifting it up (1) then sliding it to the
direction shown below (2).
3
Locate the CPU socket on the mainboard.
Warning! The heatsink may feel hot after long period of
usage. It is recommended to allow a few minutes of
cooling period before attempting the upgrade.
®
®
Pentium
®
Celeron processor running at 400 MHz to 2.2
4 processor running at 533
47
Advertisement
Table of Contents
