Setting The Dab Priority Function; When It Is On; When It Is Off; Switching Auto Pi Seek - Pioneer KEH-P7020R Operation Manual

Initial Settings
Setting the DAB Priority
Function
When a hide-away DAB tuner (GEX-P700DAB) is
connected, you can set the product in this mode
so that the interruption of traffic information
from the hide-away DAB tuner takes
precedence over this product's RDS traffic
announcement function.

When it is on

During DAB reception, when the selected ser-
vice component supports road traffic flashes
and transport flashes, reception is not inter-
rupted by this product's RDS traffic announce-
ment.

When it is off

Interruption is by the first received news flash
from among this product's RDS and the hide-
away DAB traffic information broadcasts.
1 Press to select
FUNCTION
Press repeatedly until
FUNCTION
appears in the display.
on or off with 5/∞.
2 Select
DAB
Pressing 5/∞ will switch
on and off and that status will be displayed (e.g.,
).
DAB Priority :ON

Switching Auto PI Seek

The unit can automatically search for a different
station with the same programming, even dur-
ing preset recall.
1 Press to select
FUNCTION
Press repeatedly until
FUNCTION
appears in the display.
.
DAB
DAB Priority
between
DAB Priority
.
A-PI
Auto PI
on or off with 5/∞.
2 Select
A-PI
Pressing 5/∞ will switch
and off and that status will be displayed (e.g.,
).
Auto PI :ON

Switching the warning tone

If the front panel is not detached from the head
unit within five seconds of turning off the igni-
tion, a warning tone will sound. You can turn off
this warning tone.
1 Press to select
FUNCTION
Press repeatedly until
FUNCTION
appears in the display.
on or off with 5/∞.
2 Select
WARN
Pressing 5/∞ will switch
and off and that status will be displayed (e.g.,
).
Warning :ON

Switching the auxiliary setting

It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1 Press to select
FUNCTION
Press repeatedly until
FUNCTION
in the display.
on or off with 5/∞.
2 Select
AUX
Pressing 5/∞ will switch
off and that status will be displayed (e.g.,
).
AUX :ON
between on
Auto PI
.
WARN
Warning
between on
Warning
.
AUX
appears
AUX
between on and
AUX
En
Section
08
37