Specifications - Pioneer KEH-P1010R Operation Manual

Specifications

General
Power source .......... 14.4 V DC (10.8 – 15.1 V allowable)
Grounding system ........................................ Negative type
Max. current consumption ........................................ 8.5 A
Dimensions
(mounting size) ...... 178 (W) 50 (H) 155 (D) mm
(front face) .............. 188 (W) 58 (H) 19 (D) mm
Weight ...................................................................... 1.2 kg
Amplifier
Maximum power output ...................................... 45 W 4
Continuous power output .................................... 25 W 4
Load impedance .......................... 4
Preout maximum output level/output impedance
.................................................................. 2.2 V /1 k
Equalizer (3 band equalizer)
(Low) .............................................................. ±12 dB
(Mid) .............................................................. ±12 dB
(High) ............................................................ ±12 dB
Loudness contour
(Low) .................. +3.5 dB (100 Hz), +3 dB (10 kHz)
(Mid) ................ +10 dB (100 Hz), +6.5 dB (10 kHz)
(High) ................ +11 dB (100 Hz), +11 dB (10 kHz)
Cassette player
Tape ........................ Compact cassette tape (C-30 – C-90)
Tape speed ........................................................ 4.8 cm/sec.
Fast forward/rewinding time .... Approx. 100 sec. for C-60
Wow & flutter .......................................... 0.13% (WRMS)
Frequency response ...................... 30 – 16,000 Hz (±3 dB)
Stereo separation ...................................................... 45 dB
Signal-to-noise ratio .................... 41 dB (IEC-A network)
(DIN45324, +B = 14.4 V)
(4 – 8 allowable)
(volume: –30 dB)
FM tuner
Frequency range ...................................... 87.5 – 108 MHz
Usable sensitivity ...................................................... 9 dBf
(0.77 V/75 , mono, S/N: 30 dB)
50 dB quieting sensitivity ........................................ 15 dBf
Signal-to-noise ratio ...................... 70 dB (IEC-A network)
Distortion .......................... 0.3% (at 65 dBf, 1 kHz, stereo)
Frequency response ...................... 30 – 15,000 Hz (±3 dB)
Stereo separation .......................... 40 dB (at 65 dBf, 1 kHz)
MW tuner
Frequency range ........................ 531 – 1,602 kHz (9 kHz)
Usable sensitivity .............................. 18 V (S/N: 20 dB)
Selectivity .................................................. 50 dB (±9 kHz)
LW tuner
Frequency range ........................................ 153 – 281 kHz
Usable sensitivity .............................. 30 V (S/N: 20 dB)
Selectivity .................................................. 50 dB (±9 kHz)
Note:
• Specifications and the design are subject to possi-
ble modification without notice due to improve-
ments.
(1.5 V/75 , mono)
28