Epson EB-1795F User Manual page 42

Image Shape
The projector's sensor can detect the screen size and shape in these
conditions:
• Screen size is 100 inches or less
• Projection distance is about 1.0 to 2.5 m
• Projection angle is about 20º right or left, or 30º up or down
• The room is not too dark
• The projection surface is not patterned and does not deflect the sensor in
some way
a
Turn on the projector and display an image.
b
Press the [Screen Fit] button on the control panel or remote control.
You see a message on the screen.
c
Move the projector as necessary to display the message in the middle of
the screen.
d
Zoom into the image until the yellow frame extends beyond the edges
of the screen.
• If the yellow frame is still within the screen frame after
a
zooming in all the way, move the projector farther away from
the screen.
• For example, when you project onto a wide screen in a small
room and you cannot extend the yellow frame beyond the
screen frame, the yellow frame must include at least the top
and bottom two sides of the screen so that Screen Fit detects
the screen height and adjusts the image to fit the screen.
e
Press the [Screen Fit] button again.
After the adjustment screen appears, do not move the projector or
block the image. The projected image is corrected according to the
aspect ratio of the image being input and this message appears.
42