Feature Specifications - HP StorageWorks XP10000 Owner's Manual

Feature specifications
Feature
Power
Equipment racks
Disk chassis (60 drives each)
Maximum hard disk drives
Maximum spare disk drives
Maximum parity groups/array
Maximum disk drive capacity
Maximum cache
Available hard disk drives
Maximum shared memory
MIX pairs
CHIP pairs
Maximum host ports
RAID level
Maximum LDEVs
Maximum LUNs
Maximum LUNs per port
Specifications are subject to change without notice. Contact HP for the firmware required
to achieve the maximum number of LDEVs.
20 Overview
Specification
Single-phase, 200VAC, 50 or 60 Hz
One standard primary rack One optional second rack
One standard primary rack disk chassis One optional
primary rack disk chassis Two optional second rack
disk chassis
120 in one rack, 240 in two racks
16
59
69.2 TB
64 GB
73 GB 15,000 RPM
146 GB 10,000 RPM or 15,000 RPM
300 GB 10,000 RPM
6 GB
1 pair
1 pair, available in FC, iSCSI, NAS, FICON, ESCON
48 FC
RAID 1 (2D+2D or 4D+4D)
RAID 5 (3D+1P or 7D+1P)
RAID 6 (6D+2P)
16,384 for OPEN systems; 65,536 for mainframes
(OPEN system LDEVS must be in first 16k; mainframe
LDEVS may occupy any part of the available range.)
49,152
1024