Stitch Selection; Smocking Stitch - Bernina Bernette 55 Manual

EN

Stitch selection

Triple straight stitch: (1)
Pattern selector on " ".
For hardwearing seams.
Turn the stitch length dial to "4".
(model 55)
Turn the stitch length dial to "S". (model
65/80e/90e)
Turn the stitch width dial to "0".
The machine sews two stitches forwards
and one stitch backwards.
This gives triple reinforcement.
Triple zig-zag: (2)
Pattern selector on " ".
For hardwearing seams, hems and
decorative seams.
Turn the stitch length dial to "4", and
adjust the stitch width dial between "3"
and "5". (model 55)
Turn the stitch length dial to "S", and
adjust the stitch width dial between "3"
and "7". (model 65/80e/90e)
Triple zig-zag is suitable for firm fabrics like
denim, corduroy, etc.
EN

Smocking stitch

Seams, hems, T-shirts, underwear, etc.
Set the machine as illustrated.
Pattern selector on " ".
Turn the stitch length dial to "4". Set stitch
width control between "4" - "5".
(model 55)
Turn the stitch length dial to "S". Set stitch
width control between "4" - "7". (model
65/80e/90e)
This stitch can be used for all types of
jersey as well as for woven fabrics. (1)
Sew at 1 cm (1/4") from the fabric edge
and trim the surplus fabric. (2)