Xcommand Video Layout Layoutfamily Set; Xcommand Video Matrix Assign; Xcommand Video Matrix Reset - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xCommand Video Layout LayoutFamily Set

Select the screen layout mode.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Layout LayoutFamily Set [Target: Target] [CallId: CallId]
LayoutFamily: LayoutFamily [CustomLayoutName: "CustomLayoutName"]
where
: local/remote
Target
Select if the target is the local layout or the remote layout.
: Integer (0..65534)
CallId
The CallID is returned when the xCommand Dial command is run. During the call you
can run the xStatus Call command to see the CallId.
: auto/custom/equal/overlay/prominent/single
LayoutFamily
Select a layout family.
: String (1, 128)
CustomLayoutName
Enter a name for the layout.
SX20 Codec API Reference Guide CE8.3, JANUARY 2017.
D15316.05
About the API xConfiguration xCommand xCommand

xCommand Video Matrix Assign

xCommand Video Matrix commands are a smart overlay to the xCommand Video Layout
commands to make it easy to do simple video compositions.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Matrix Assign [Mode: Mode] Output:
where
: Add/Replace
Mode
Choose whether to replace the existing source on that output rendered full screen or to
add it. Using Add, the layout engine will recompose the multiple sources automatically.
Replace is the default value.
: Integer (1..2)
Output
Choose the output you wish to use for this layout.
: Integer (1..3)
SourceId
The identifier (ID) of the input source. Input Source [n] has ID n. Run the following API
command to find the ID: xStatus Video Input Source.

xCommand Video Matrix Reset

Reset the content on the output to the default layout
xCommand Video Matrix commands are a smart overlay to the xCommand Video Layout
commands to make it easy to do simple video compositions.
Requires user role: ADMIN, USER
USAGE:
xCommand Video Matrix Reset [Output: Output]
where
: Integer (1..2)
Output
Choose the output you want to reset.
147
API Reference Guide
xStatus Appendices
Output SourceId: SourceId
Copyright © 2017 Cisco Systems, Inc. All rights reserved.