Xstatus Sip Profile 1 Directoryuri Primary Uri; Standby Status; Xstatus Standby Active - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec
Contents Introduction

xStatus SIP Profile 1 DirectoryURI Primary URI

Returns the primary directory URI set for the endpoint in UCM. Directory URI is associated with a
directory number, and can be used to make calls and identify callers. Up to five directory URIs can
be set, but only one of them can be set as primary.
Value space of the result returned:
<String>
Example:
xStatus SIP Profile DirectoryURI Primary URI
*s SIP Profile 1 DirectoryURI Primary URI: "123456@company.com"
** end
xStatus SIP Profile 1 DirectoryURI Primary URI
Returns the primary directory URI set for the endpoint in UCM. Directory URI is associated with a
directory number, and can be used to make calls and identify callers. Up to five directory URIs can
be set, but only one of them can be set as primary.
Value space of the result returned:
<String>
Example:
xStatus SIP Profile DirectoryURI Primary URI
*s SIP Profile 1 DirectoryURI Primary URI: "123456@company.com"
** end
SX20 Codec API Reference Guide TC6.2, JULY 2013.
D14949.04
About the API xConfiguration

Standby status

xStatus Standby Active

163
xCommand
Shows if the system is in standby or not.
Value space of the result returned:
<On/Off>
Example:
xStatus Standby Active
*s Standby Active: Off
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2013 Cisco Systems, Inc. All rights reserved.