Split Embroidery Patterns - Brother 888-M00 Operation Manual

Embroidering
■ Method 2
a Select a straight stitch frame pattern, and embroider
the pattern onto the base fabric.
b Place the appliqué fabric over the pattern embroidered
a
in step and embroider the same pattern on the
appliqué fabric.
• Be sure that the appliqué fabric completely covers
the stitched line.
c Remove the embroidery frame from the embroidery
unit, and cut around the outside of the stitches of the
appliqué fabric.
And then, reattach the embroidery frame to the
embroidery unit.
Note
• Do not remove the fabric from the embroidery frame to
cut it. Also, do not pull or push on the fabric. Otherwise,
the fabric may loosen in the frame.
d Select the satin stitch frame pattern of the same shape
as the appliqué and embroider the satin stitch pattern
to create an appliqué.
• Do not change the size or position of the pattern.
72

Split embroidery patterns

Split embroidery patterns created with PE-DESIGN Ver.7 or
later, or PE-DESIGN NEXT can be embroidered. With split
embroidery patterns, embroidery designs larger than the
embroidery hoop are divided into multiple sections, which
combine to create a single pattern after each section is
embroidered.
For details on creating split embroidery patterns and for more
detailed embroidery instructions, refer to the Instruction
manual included with PE-DESIGN Ver.7 or later, or PE-
DESIGN NEXT.
Insert the USB flash drive containing the created split
a
embroidery pattern, and then select the split
embroidery pattern to be embroidered.
• For details, refer to "Retrieving embroidery patterns"
on page 78.
b Select section to be embroidered and press
• Select the sections in alphabetical order.
c Press and press
d Press the "Start/Stop" button to embroider the pattern
section.
e When embroidering is finished, the following screen
appears. Press .
 A screen appears so that a section of the split
embroidery pattern can be selected.
b
f Repeat steps through
remaining sections of the pattern.
.
.
e
to embroider the