Advertisement
Table of Contents
Advertisement
Table of Contents
Related Manuals for Bowers & Wilkins 702 S2
Summary of Contents for Bowers & Wilkins 702 S2
- Page 2 Welcome and thank you for choosing Bowers & Wilkins. Bienvenue et merci d’avoir choisi Bowers & Wilkins. Notre Our founder, John Bowers, believed that imaginative design, fondateur, John Bowers, était persuadé qu’une conception innovative engineering and advanced technology were keys that imaginative, des innovations en terme d’ingénierie et des could unlock the enjoyment of audio in the home.
- Page 3 1. Unpacking Carton Contents Environmental Information This product complies with international directives, including but Check in the carton for: not limited to: 1 Foam plug 1 Accessory pack containing i. the Restriction of Hazardous Substances (RoHS) in 4 Rubber feet electrical and electronic equipment, 4 M6 spike feet ii.
- Page 4 2. Positioning Speaker Installation The spike feet are designed to pierce carpet and rest on the floor The speakers are intended to be floor mounted only. It is surface. Initially, screw the lock nuts onto the spikes enough to important to ensure that the speakers stand firmly on the floor leave the nuts floating just above the carpet when the spikes using the spike feet supplied whenever possible.
- Page 5 5 Channels 7 Channels >0.5m >0.5m 1.5m - 3m >0.5m 110° - 130° ~40° Speaker Positioning Home Theatre Systems Adjustment of speaker position following initial installation If the speakers are to be used for the front channels in a home will probably further improve the sound quality and is theatre system, they should be placed closer together than for usually worthwhile.
- Page 6 3. Connections All connections should be made with the audio equipment Ensure that the positive terminals on the speaker (marked + and switched off. coloured red) are connected to the positive output terminal on the amplifier and the negative terminals on the speaker (marked – and There are 2 linked pairs of terminals on the back of the speaker.
- Page 7 4. Fine Tuning Before fine tuning, make sure that all the connections in the If the bass seems uneven with frequency this will most probably installation are correct and secure. be a consequence of the acoustic properties of your listening room.
- Page 8 5. Running In 6. Aftercare The performance of the speaker will change subtly during the The cabinet surfaces will usually only require dusting. If you wish initial listening period. If the speaker has been stored in a cold to use an aerosol or other cleaner, apply the cleaner onto the environment, the damping compounds and suspension materials cloth, not directly onto the product and test a small area first, of the drive units will take some time to recover their correct...