Configuring Windows 2000 Pcs - Motorola NC800 User Manual

5. Next, click on the Gateway tab and ensure that the Installed
Gateway field is blank. The Motorola Cellular Gateway
NC800 IP address will be automatically obtained when the
DHCP protocol is executed.
6. Click on OK to apply the changes.
7. When the Network dialog box re-appears, click on OK to
close it.
8. Windows may ask for the original Windows disk. Insert your
Windows CD into your CD-ROM drive and let Windows finish
installing / updating the necessary files.
9. Windows may also ask you to restart the PC – please do so.
If Windows does not ask you to restart, do so anyway.

Configuring Windows 2000 PCs

Use the following procedure to configure Windows 2000 PCs to
connect to the Motorola Cellular Gateway NC800:
1. Click on the
Panel. Double click on Network and Dial-up Connections.
2. Double click on the
Ethernet adapter.
3. The Local Area Connection Status dialog box is displayed:
4. Click on the Properties button.
Motorola Cellular Gateway NC800 User Guide Version 2.0
button. Select Settings->Control
for the applicable
Page 22 of 110