Operator Controls And Indicators - Siemens SIMATIC S7-300 Manual

Operator controls and indicators

Operator controls and indicators of the CPU
The following diagram shows the operator controls and indicators on the Technology CPU.
Figure 3-1
Table 3-1
The number in the
diagram
1
2
3
4
5
6
7
8
9
Integrated inputs and outputs for integrated technology
You can use the integrated technology inputs and outputs for technology functions and
configure them using
S7-300 CPU Data: CPU 315T-2 DP
Manual, 12/2005, A5E00427933-02
Operator controls and indicators of the Technology CPU
Operator controls and indicators of the Technology CPU
points to the following element on the Technology CPU
Bus error indicators
Status and error displays
Slot for the Micro Memory Card (MMC), incl. the ejector
Connection of the integrated I/Os
Mode selector switch
Power supply connection
Grounding slide
Interface X1 MPI/DP
Interface X3 DP(DRIVE)
S7T Config
(included in the optional package
3
S7-Technology
).
3-1